Function of Major Components
The figure below shows the major components of the Envelope Feeder.
Clutch 29 — Controls the transmission of the drive power by the actuation
I
of the clutch function.
Clutch Assembly — One-way Torque: 25, 26, 26A and 26B. Prevents
I
clockwise rotation.
Feed 1 Roller Assembly — Transfers the envelope by its counterclockwise
I
rotation.
Feed 2 Roller Assembly and Roller Assembly Bottom — Transfers the
I
envelope by its counterclockwise rotation and transfers the drive power to
the Feed Belts at the same time.
Transfer Roller Assembly — Transfers the envelope to the registration paper
I
path.
No Paper Sensor — Detects out of envelope condition.
I
Envelope Exit Sensor Assembly — Detects exit of the envelope.
I
Envelope PWB — Controls the Envelope Feeder and is the signal interface
I
to the Engine Logic Board.
Major Components of the Envelope Feeder
8-36
Phaser 4400 Laser Printer Service Manual