Xerographics
RRP 7.1 Transfer Roller Assembly
See the Parts List on
Warning: Switch off the power and disconnect the Power Cord.
Caution: Do not touch the surface of the Transfer Roller with your
hands. Oil from your hands can cause image-quality
problems.
After removing the Transfer Roller, store the Roller on clean paper and cover with
another sheet of paper.
1.
Open the Front Cover Assembly and remove the Print Cartridge.
2.
Push down to release the left and right latches of the Transfer Roller Assembly.
3.
Holding the ends of the Transfer Roller Assembly, remove the assembly.
Transfer Roller Assembly
Phaser 4400 Laser Printer Service Manual
page
7-20.
6-79