Rrp 9.11 Stacker Harness Assembly - Xerox 4400DT - Phaser B/W Laser Printer Service Manual

RRP 9.11 Stacker Harness Assembly

See the Parts List on
Caution: These components are susceptible to electrostatic
discharge. Observe all ESD procedures to avoid damage.
Warning: Switch off the power and disconnect the Power Cord.
1. Remove Tray 1.
2. Remove the Left Interface Cover
3. Remove the Left Cover
4. Remove the Front Cover Assembly
page 6-11).
5. Remove the Left Front Cover
6. Remove the Top Cover Assembly
7. Remove the Interlock Cover
8. Remove the Left Plate
9. Disconnect P/J35 from the Engine Logic Board
page 6-89).
10.Release the Stacker Harness from all cable clamps.
11.Remove the two screws that secure the Stacker Harness Assembly.
12.Remove the Stacker Harness Assembly from the printer.
Stacker Harness Assembly
6-98
page 7-24.
(RRP 1.1 Left Interface Cover
(RRP 1.2 Left Cover
(RRP 1.7 Left Front Cover
(RRP 1.4 Top Cover Assembly
(RRP 1.10 Interlock Cover
(RRP 1.11 Left Plate
on page 6-7).
(RRP 1.6 Front Cover Assembly
on page 6-16).
(RRP 9.3 Engine Logic Board
Phaser 4400 Laser Printer Service Manual
on page 6-6).
on
on page 6-12).
on page 6-9).
on page 6-15).
on