Rrp 6.2 Fuser Assembly - Xerox 4400DT - Phaser B/W Laser Printer Service Manual

RRP 6.2 Fuser Assembly

See the Parts List on
Warning: Switch off the power and disconnect the Power Cord.
The Fuser may be hot.
1. Open the Rear Cover Assembly.
2. Remove Duplex Unit (if installed)
3. Remove the two thumb screws that secure the Fuser Assembly to the printer and
remove the Fuser.
Fuser Assembly
6-66
page 7-16.
(RRP 12.1 Duplex Unit
Phaser 4400 Laser Printer Service Manual
on page 6-141).