Rrp 8.2 Main Drive Gear Assembly - Xerox 4400DT - Phaser B/W Laser Printer Service Manual

RRP 8.2 Main Drive Gear Assembly

See the Parts List on
Warning: Switch off the power and disconnect the Power Cord.
1. Remove Tray 1.
2. Remove the Left Interface Cover
3. Remove the Left Cover
4. Remove the Top Cover Assembly
5. Remove the Left Plate
6. Remove the Plate Handle
7. Remove the Fuser Assembly
8. Remove the MPT Chute Assembly
9. Remove the Paper Handler Assembly
page 6-57).
10.Remove the Chute Trans Assembly
page 6-65).
11.Remove the Print Cartridge Top Guide Assembly
Guide Assembly
12.Remove the Image Processor Board
page 6-88).
13.Remove the Engine Logic Board
14.Remove the Main Motor Assembly
page 6-84).
15.Remove the Paper Feeder
16.Remove the four screws that secure the Drive Gear Assembly from the left side of
the printer. (Screws are marked with a "D").
17.Pull bottom of assembly out and lower the assembly to release the locking tab and
remove.
Phaser 4400 Laser Printer Service Manual
page 7-20.
(RRP 1.1 Left Interface Cover
(RRP 1.2 Left Cover
(RRP 1.4 Top Cover Assembly
(RRP 1.11 Left Plate
(RRP 1.12 Plate Handle
(RRP 6.2 Fuser Assembly
on page 6-80).
(RRP 9.3 Engine Logic Board
(RRP 3.1 Paper Feeder
on page 6-7).
on page 6-16).
on page 6-17).
(RRP 4.1 MPT Chute Assembly
(RRP 5.1 Paper Handler Assembly
(RRP 6.1 Transport Chute Assembly
(RRP 7.2 Print Cartridge Top
(RRP 9.2 Image Processor Board
(RRP 8.1 Main Motor Assembly
on page 6-28).
on page 6-6).
on page 6-9).
on page 6-66).
on page 6-44).
on
on
on page 6-89).
on
on
6-85