Rrp 1.8 Rear Cover Assembly - Xerox 4400DT - Phaser B/W Laser Printer Service Manual

RRP 1.8 Rear Cover Assembly

See the Parts List on
Warning: Switch off the power and disconnect the Power Cord.
1. Open the Rear Cover Assembly by squeezing the clips.
2. Lift the lead edge of the locking tab to release and remove the Stopper from the
cover.
3. Slide the Pivot Stopper that secures the left Rear Cover Assembly.
4. Slide the Rear Cover Assembly to the right (as viewed from the rear).
Rear Cover Assembly
Phaser 4400 Laser Printer Service Manual
page 7-4.
6-13