RRP 10.9 Static Eliminator
See the Parts List on
Warning: Switch off the power and disconnect the Power Cord.
1.
Remove the Stacker
2.
Remove the Lower Cover
3.
Remove the Inner Exit Chute Assembly
page 6-106).
4.
Remove the three screws that secure the Static Eliminator to the Inner Exit Chute.
5.
Remove the Static Eliminator.
Static Eliminator
Phaser 4400 Laser Printer Service Manual
page
7-40.
(RRP 10.1 Stacker
(RRP 10.5 Lower Cover
on page 6-101).
on page 6-105).
(RRP 10.6 Inner Exit Chute Assembly
on
6-109