RRP 10.5 HCS Exit Gate Solenoid
(See
PL 10.1 High Capacity Stacker [HCS] (1 of
Figure 112 Exit Gate Solenoid
Removal
Warning: Switch off the power and disconnect the Power Cord.
1.
Open the printer Rear Cover.
2.
Press the locking tab and disconnect P/J519 from the Rear Cover.
3.
Press the locking tab on the Solenoid Assembly and remove the solenoid.
Replacement
Reinstall the components in the reverse order.
322
2))
Phaser 5400 Laser Printer Service Guide