RRP 34 Fuser Fan Assembly
S7700-025
Figure 7-39 Fuser Fan Assembly
Removal
1.
Remove the Rear Cover (RRP 1, on page 7-154).
2.
Remove the Top Cover (RRP 3, on page 7-156).
3.
Remove Right Side Cover (RRP 2, on page 7-155).
Note
Note the routing of the wiring harness.
Note
It is easier to re-install the wire harness if the Fuser Fan
and plastic mounting bracket are removed from the
printer.
4.
Remove the two screws that secure the Fuser Fan Assembly and remove
the assembly.
5.
Disconnect the wiring harness.
Phaser 7700 Color Laser Printer Service Manual
Locating Pin
7-195