Turn On The Media Take-Up Unit; Borderless Printng Not Possible - Canon imagePROGRAF iPF815 User Manual

Ipf815 user manual ver.1.00
Hide thumbs Also See for imagePROGRAF iPF815:
Table of Contents

Advertisement

The Take-up Reel setting in the printer MAIN MENU
was changed from Enable to Disable, but a print job was
received before the roll was removed.

Turn on the media take-up unit.

The Media Take-up Unit was off when you selected Enable for Take-up Reel.

Borderless printng not possible.

"Lift release lever and reload the paper."
Cause
Because paper expands or con-
tracts depending on the environ-
ment of use, it may become nar-
rower or wider than the suppor-
ted width for borderless printing.
The paper is loaded askew.
"Check supported paper."
Cause
The print job received specifies a type
or width of paper that is not compatible
with borderless printing.
The loaded paper is not compatible with
borderless printing.
iPF815
Cause
Cause
Hold down the Stop button for a second or more to cancel printing.
Use each type of paper only where the recommended environmental conditions are
met. For details on environmental conditions for various paper, see the Paper Ref-
erence Guide.
(See "Types of Paper.")
Lift the Release Lever and straighten the paper so that the edge of the paper is in
the width of the ink groove for borderless printing.
Insert the roll firmly until it touches the flange of the Roll Holder.
(See "Attaching the Roll Holder to Rolls.")
If you press the Online button and continue printing, the document will be printed
with a border.
Follow these steps to change the settings of the print job to enable border-
less printing.
1. Hold down the Stop button for a second or more to cancel printing.
2. Make sure the correct printer driver for the printer is selected and try
printing again.
For information on types of paper compatible with borderless printing,
refer to the Paper Reference Guide.
(See "Types of Paper.")
If you press the Online button and continue printing, the document will be
printed with a border.
Hold down the Stop button for a second or more to cancel printing.
If you press the Online button and continue printing, the document will be
printed with a border.
Error Message
Corrective Action
Press the Online button to resume printing.
Corrective Action
Turn the Media Take-up Unit on.
Corrective Action
→P.617
→P.623
Corrective Action
→P.617
Turn on the media take-up unit.
>
Messages regarding paper
>
13
903

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Imageprograf ipf815 mfp m40

Table of Contents