Canon imagePROGRAF iPF815 User Manual page 772

Printer Parts > Optional accessories
5.
Push the flanges in firmly until the paper core is secured in place and push down the lever (a) toward the shaft.
6.
Load the Rewind Spool on the Media Take-up Unit so that the gear of the Rewind Spool (a) meshes with the gear of
the Right Media Take-up Unit (b).
9
756
Using the Media Take-up Unit
>
Important
• After pushing in the flanges firmly, make sure the paper core is secure and does not move around.
Move the paper core left and right. If there is a gap between the flanges and paper core, repeat steps
2–4.
Important
• If you attempt to load the Rewind Spool with the left and right ends inverted by mistake, the Media
Take-up Unit cannot be turned on.
• If the gear of the Rewind Spool (a) does not mesh with the gear of the Right Media Take-up Unit (b),
the Media Take-up Unit cannot be turned on.
iPF815