Canon imagePROGRAF iPF815 User Manual page 659

Man- (See "Cutting Roll Paper After Printing.")
ual
→P.196
→P.644
Paper Choose this option if you want to cut pages by
pressing Cutter Unit buttons for manual cutting
Cut-
ting after printing when the printer driver is config-
ured to Auto Cut > No or Print Cut Guideline.
→P.646
Otherwise choose this option if you want to cut
the roll edge after loading a roll.
Note
• Automatic and Eject are valid only when you have specified Auto Cut > Yes in the printer driver.
• With Eject, printing does not resume after a series of jobs have been printed continuously until the roll is cut.
Cut rolls manually in the following cases:
Eject (waiting for ink to dry after printing)
Important
• When cutting wide printed documents after ejection, have two people support the documents. If the paper
drops, printed documents may be damaged.
• Do not lift the paper when holding printed documents before cutting. If the paper rises, it may affect the
printing quality.
1.
Press the Menu button to display MAIN MENU.
2.
Press ▲ or ▼ to select Paper Details, and then press the ▶ button.
iPF815
Cutting Method
Handling Paper
Menu Settings
Cutting Manual Auto Cut
Mode
Paper Yes
Cutting
Specifying the Cutting Method for Rolls
> Handling rolls >
Driver Setting
No Yes
Print Cut
Guideline
No Print
Cut
Guideline
7
643