Paper Jam; Paper Loaded Askew - Canon imagePROGRAF iPF815 User Manual

Error Message >

Paper jam.

"Lift the release lever."
Cause
A paper jam occurred
in the printer during
printing.
"Manually rewind the roll all the way and press OK."
Cause
A paper jam occurred
when advancing the pa-
per.

Paper loaded askew.

Paper is loaded askew.
13
900
Paper jam.
Messages regarding paper >
1. Lift the Release Lever and remove the jammed paper.
(See "Clearing Jammed Roll Paper.")
(See "Clearing a Jammed Sheet.")
2. If "Not finished printing. Finish printing remaining jobs?" is shown on the Display
Screen, press the OK button.
Printing will resume, starting from the page on which the error occurred.
1. Rewind paper on the Roll Holder manually, all the way, and then press the OK button.
2. If "Not finished printing. Finish printing remaining jobs?" is shown on the Display
Screen, press the OK button.
Printing will resume, starting from the page on which the error occurred.
Cause
Corrective Action
→P.852
→P.856
Corrective Action
Corrective Action
Follow these steps to reload the roll.
1. Lift the Release Lever.
2. Open the Top Cover.
3. Adjust the right edge of the roll to make it parallel to the
right Paper Alignment Line.
4. Lower the Release Lever.
5. Close the Top Cover.
(See "Loading Rolls in the Printer.")
If this error recurs after you reload the roll, remove the Roll
Holder from the printer, push the roll firmly in until it touches
the Roll Holder flange, and reload the Roll Holder in the print-
er.
(See "Attaching the Roll Holder to Rolls.")
Follow these step to reload a sheet.
1. Lift the Release Lever.
2. Open the Top Cover.
3. Adjust the right edge of the sheet to make it parallel to the
right Paper Alignment Line and the trailing edge of the
sheet to make it parallel to the paper alignment line under
the Paper Retainer.
4. Lower the Release Lever.
→P.628
→P.623
iPF815