Sheet Removed; Sheet Printing Is Selected; Regular Printing Is Selected, But A Roll Is Loaded - Canon imagePROGRAF iPF815 User Manual

Sheet removed.

Cause
A sheet has come out of the printer during printing.

Sheet printing is selected.

You have attempted to print a test print sheet or other printer
status information on a sheet, but no sheet is loaded.

Regular printing is selected, but a roll is loaded.

Cause
A print job for printing on
sheets was sent when a roll is
loaded.
You are using a roll with the
Media Take-up Unit, but a print
job requiring sheets was sent.
iPF815
1. Lift the Release Lever and remove the paper.
2. If "Not finished printing. Finish printing remaining jobs?"
is shown on the Display Screen, press the OK button.
Printing will resume, starting from the page on which the error
occurred.
Cause
Hold down the Stop button for a second or more to cancel printing.
Remove the roll and load a sheet of the type and size of paper you have specified in
the printer driver.
(See "Removing the Roll from the Printer.")
(See "Loading and Printing on Sheets.")
1. Press the Stop button for a second to cancel the job involving sheets.
2. Choose Paper Cutting in the menu.
3. Press the Load/Eject button and remove the roll.
4. Load a sheet and resend the print job.
Error Message > Messages regarding paper
Corrective Action
Corrective Action
Load a sheet and try printing again.
To print on a roll instead, hold down the Stop button
for more than a second to cancel printing, load a roll,
and then print.
(See "Loading and Printing on Rolls.")
Corrective Action
→P.634
→P.8
>
→P.3
13
899
Sheet removed.