Specifying Printer-Related Information - Canon imagePROGRAF iPF815 User Manual

Network Setting
Item
IPP Printer URI
RAW Printing
RAW Mode Bi-di-
rection
FTP Printing
SMTP Server Ad-
dress
Primary DNS Serv-
er Address
Secondary DNS
Server Address
DNS Host Name
DNS Domain Name
Multicast DNS
Service Name
7.
Click OK to display the Network page.
10
Note
• If you specify to configure the IP address using DHCP, BOOTP, or RARP, there must be a server that sup-
ports such protocol running in the network.
• If you specify to configure the IP address using DHCP, BOOTP, or RARP, the IP address obtained by this
method is used first. If you cannot obtain the IP address, the address specified in IP Address is used.
• It takes a minute or two to determine whether DHCP, BOOTP, or RARP are available. We recommend clear-
ing check boxes of options you will not use.
• If you are using a DNS server, select Enable DNS Dynamic Update and enter the IP Address for DNS serv-
ers, DNS host name, and DNS domain name in Primary DNS Server Address, Secondary DNS Server
Address, DNS Host Name, and DNS Domain Name, respectively.
778

Specifying Printer-Related Information

Follow the steps below to specify device information and security settings.
1.
Start the web browser and enter the following URL in the Location (or Address ) box to display the RemoteUI
page.
http://printer IP address or name/
Example: http://xxx.xxx.xxx.xxx/
2.
Select Administrator Mode and click Logon.
Specifying Printer-Related Information
> Network Setting >
When using a standard Windows port for IPP printing, enter an
URL less than 255 bytes for all characters for http://"IP ad-
dress"/IPP-URI.
Activate this setting to use Raw Printing.
Activate this setting to use Raw mode bidirectional communica-
tion.
Activate this setting to use FTP Printing.
Specify the SMTP server's IP address.
Specify the IP address of the primary DNS server.
Specify the IP address of the secondary DNS server.
Specify the printer host name, up to 63 characters (1–63 charac-
ters). Use single-byte letters, numbers, and - (hyphens). Do not use
numbers or - for the first character or - for the last character.
Specify the printer domain name, up to 63 characters. Use single-
byte letters, numbers, - (hyphens), and . (periods). Do not use
numbers, -, or . for the first character, or - or . for the last charac-
ter.
Specify the printer's Multicast DNS service name. (1–63 charac-
ters)
This name will be displayed when Bonjour functions are used.
Details Default Setting
printer
On
Off
On
0.0.0.0
0.0.0.0
0.0.0.0
NB-17FBxxxxxxxxxxxx
blank
Canon iPFxxxx (xxxxxx)
iPF815