Configuring The Printer's Tcp/Ip Network Settings - Canon imagePROGRAF iPF815 User Manual

Important
• Use Netscape Navigator 6.0 or later, Internet Explorer 5.01 or later, or Firefox 1.5 or later as a web browser.
In Mac OS X, you can also use Safari 1.32 or later or Safari 2.03 or later.
• Access is not possible via a proxy server. In environments where a proxy server is used, add the printer's IP
address to Exceptions (addresses accessed without a proxy server) in the web browser proxy server settings.
(Settings may vary depending on the network environment.)
• Enable JavaScript and cookies in the web browser.
• If you access RemoteUI with the printer name instead of its IP address, make sure the DNS settings are cor-
rectly configured.

Configuring the Printer's TCP/IP Network Settings

Follow the steps below to configure the TCP/IP network settings.
1.
Start the web browser and enter the following URL in the Location (or Address ) box to display the RemoteUI
page.
http://printer IP address or name/
Example: http://xxx.xxx.xxx.xxx/
2.
Select Administrator Mode and click Logon.
3.
If a password has been set on the printer, enter the password.
4.
Click Network in the Device Manager menu at left to display the Network page.
5.
Click Edit in the upper-right corner of the TCP/IP group to display the Edit TCP/IP Protocol Settings page.
6.
Refer to the TCP/IP Settings Items table to complete the settings.
TCP/IP Settings Items
Item
Use DHCP
Use BOOTP
Use RARP
Enable DNS Dy-
namic Update
Use Zeroconf
Function
IP Address
Subnet Mask
Gateway Address
LPD Printing
IPP Printing
IPP Printer URI
iPF815
Details
Activate this setting to use DHCP for configuring the IP address.
Activate this setting to use BOOTP for configuring the IP address.
Activate this setting to use RARP for configuring the IP address.
Activate this setting to perform DNS server registration automati-
cally.
Activate this setting to use Bonjour.
Specify the printer's IP address.
Specify the printer's subnet mask.
Specify the printer's default gateway.
Activate this setting to use LDP Printing.
Activate this setting to use IPP Printing.
Specify the URI of the printer used for IPP printing using up to
252 characters.
Network Setting
Default Setting
Off
Off
Off
Off
On
0.0.0.0
0.0.0.0
0.0.0.0
On
On
printer
Configuring the Printer's TCP/IP Network Settings
> Network Setting >
10
777