Canon imagePROGRAF iPF815 User Manual page 744

Printer Parts > Control Panel
Paper Manag-
er
Line & Pen
Manager
9
728
Main Menu Settings
>
Setting Item
Margin
Conserve Paper
Auto Rotate
Nesting Use Nesting
Nesting Wait-
Time
Cut Lines
Enable merge
Pen Setup Select Palette
Define Palette
Reset Palette
Smoothing
Description, Instructions
Specify the margin around paper. The margin for the trailing
edge of sheets is 23 mm (0.9 in).
However, if you have specified the leading margin in Paper
Details, the value in Paper Details has priority.
Conserves paper when printing.
If the long side of an original is shorter than the roll width,
the original is automatically rotated 90 degrees to conserve
paper. Similarly, if the long side of an original in landscape
orientation is longer than the roll width and the short side is
shorter than the roll width, the original is repositioned to fit
on the paper.
HP RTL print jobs are not rotated. Because HP RTL images
are not rotated even if the paper is rotated 90 degrees, images
may be cut off or the blank paper may be ejected. In this
case, set Auto Rotate to Off.
Selecting On will store print jobs until multiple documents
can be arranged to fill up the roll width, instead of printing
each print job as it is received.
Specify a time to wait until printing, as desired.
Select On to print cut lines between each document on the
roll.
Specify whether to merge or print over colors where lines
overlap.
Choose Off to print the second line over the first. Choose On
to merge all overlapping colors.
As pen values, choose Software, Palette A, Palette B, or
Factory.
Choose Software to print according to software settings.
Choose Palette A or Palette B to print using the value speci-
fied in Define Palette.
Specify the Width, Color, and Line Attributes in the pa-
lette Pen no.. Choose Factory to confirm the values when
Factory is selected in Select Palette.
In Line Attributes, choose No Setting or Circle Setting as
the processing for the ends and junctions of lines.
• If you choose No Setting
• If you choose Circle Setting
Restore Define Palette to the default palette settings.
Choose whether to print arcs as smooth curved lines or as
multiple connected line segments.
iPF815