Cannot Load Sheets; Paper Is Not Cut Straight; Paper Is Not Cut; The Media Take-Up Unit Continues Rotating - Canon imagePROGRAF iPF815 User Manual

Cannot Load Sheets

Cause
The paper source selection is incorrect.

Paper is not cut straight

The paper is bent or curled at the cut position.
Paper rises by the ends of the cut position before it is cut.

Paper is not cut

Cause
In the printer driver, No or Print Cut Guideline
is specified in Auto Cut.
In MAIN MENU, Eject or Manual is specified
in Cutting Mode.
Rolls are not cut when you are using the Media
Take-up Unit.

The Media Take-up Unit Continues Rotating

There is a foreign object in the path of the Media Take-up Sensor (indicated
by a dotted line).
iPF815
Press the Feeder Selection button to activate the Cut Sheet lamp.
Cause
Specify Yes in Auto Cut in the printer driver.
Specify Automatic in Cutting Mode in MAIN MENU.
Either execute Paper Cutting in the Control Panel or lift the Re-
lease Lever and cut the roll with scissors.
(See "Removing Printed Documents from the Media Take-up
Unit.")
Cause
Troubleshooting
Corrective Action
Corrective Action
Straighten out any curling by the edges of the paper.
Reload the paper correctly.
Corrective Action
→P.761
Remove the foreign object from the
Media Take-up Sensor path. Arrange
the Basket Cloth and Basket Rod so
they do not interfere with the Media
Take-up Sensor.
> Problems Regarding Paper
Corrective Action
Cannot Load Sheets
>
12
861