Submenu Display - Canon imagePROGRAF iPF815 User Manual

Information
System Info
Error Log

Submenu Display

Press the Information button to display this information, one after another: the Maintenance Cartridge capacity and remain-
ing ink levels, paper information, printer information, and HP-GL/2 settings information.
Each time you press the Information button, the following submenus are displayed.
Note
• Press any button other than the Information button to restore the previous mode.
• After you display a submenu, the printer will revert to the previous mode in about ten seconds if no print job
is received or if you do not operate the printer.
Remaining Maintenance Cartridge capacity and ink levels
The remaining Maintenance Cartridge capacity is shown on the top level of the Display Screen.
The remaining level of each ink is shown on the bottom level of the Display Screen. Ink levels shown on the Display Screen
correspond to the inks identified by the color labels on the bottom of the Display Screen.
These symbols may be displayed above the ink level: ! if ink is low, × if no ink is left, and ? if ink level detection is not on.
Remaining ink is indicated as follows.
iPF815
Setting Item
Firmware
Boot
MIT
s/n
MAC
IP
HDDSpace
1: xxxxxxxx-xxxx
2: xxxxxxxx-xxxx
Printer Parts
Description, Instructions
Displays the version of the printer and firmware.
Displays the version of the boot ROM.
Displays the version of the MIT database format.
Displays the printer's serial number.
Displays the MAC address.
Displays the IP address.
Displays the space available on the printer's hard disk.
Displays the two most recent error message numbers,
most recent first.
> Control Panel >
9
735

Submenu Display