Free Layout; Rotate Page 90 Degrees - Canon imagePROGRAF iPF815 User Manual

Mac OS X Software
G
Scaling
Resizes the document image based on a specified scaling value. Enter a value in a range of 5–600.
H
Borderless Printing
Borderless printing is available if roll paper is selected in the
Activate this setting for borderless printing to match the size and width of the paper.
• Borderless Printing on Paper of Equivalent Size
• Borderless Printing by Resizing Originals to Fit the Roll Width
• Borderless Printing at Actual Size
I
Paper Size
Choose the size of the paper you will print on.
Click Display all selections for Paper Size to list available sizes.
For details on available paper sizes, see " Paper Sizes
J
Print Centered
5
Select this checkbox to print document images in the center of the paper.
• Printing Originals Centered on Rolls
• Printing Originals Centered on Sheets
K
No Spaces at Top or Bottom
Select this checkbox to print the next image skipping blank areas above and below printable data in documents, which ena-
bles you to conserve the paper.
• Conserving Roll Paper by Printing Originals Without Top and Bottom Margins
L

Rotate Page 90 degrees

Select this checkbox to rotate the document image by 90 degrees before printing.
• Conserving Roll Paper by Rotating Originals 90 Degrees
N

Free Layout

Select this checkbox to start imagePROGRAF Free Layout before printing.
This allows you to print multiple documents next to each other.
Important
• This cannot be selected if Print Preview is enabled in the Main panel.
448
• Printing Multiple Originals Next to Each Other
Page Setup Pane
> Printer Driver >
→P.91
→P.154
→P.160
A
Paper Source list.
→P.100
→P.107
"
→P.620
→P.167
→P.133
→P.173
iPF815