This Paper Cannot Be Used; Roll Printing Is Selected; Roll Printing Is Selected, But Sheets Are Loaded; The Roll Is Empty - Canon imagePROGRAF iPF815 User Manual

Ipf815 user manual ver.1.00
Hide thumbs Also See for imagePROGRAF iPF815:
Table of Contents

Advertisement

*When using the Media Take-up Unit, either hold down the Stop button for a second or more to cancel printing or
press the Online button to continue printing. However, if you continue printing, the roll paper may run out dur-
ing the print job and you may not be able to print all of the document.

This paper cannot be used.

Cause
Paper that is too large for the printer has been
loaded.
Paper that is too small for the printer has been
loaded.
Paper has been loaded that is too small to print
the test pattern for printhead adjustment or noz-
zle checking.

Roll printing is selected.

You have attempted to print a job sent from a computer or a test
print sheet or other printer status information on a roll, but no roll is
loaded.

Roll printing is selected, but sheets are loaded.

Cause
A print job for rolls was received when a sheet is
loaded.

The roll is empty.

"Lift the release lever and replace the roll."
The roll is empty.
iPF815
Lift the Release Lever and load paper of the correct size.
(See "Paper Sizes.")
Lift the Release Lever and load paper of the correct size.
(See "Paper Sizes.")
Lift the Release Lever and load unused paper A4 or larger. More
than one sheet may be required depending on the adjustment.
Cause
Follow these steps to load and print on a roll.
1. Press the OK button and remove the sheet.
2. Load a new roll.
The printer now starts printing the print job.
Hold down the Stop button for a second or more to cancel printing.
Cause
Error Message
Corrective Action
→P.620
→P.620
Corrective Action
Load a roll and try printing again.
To print on a sheet instead, hold down the Stop
button for more than a second to cancel printing,
load a sheet, and then print.
(See "Loading and Printing on Sheets.")
→P.8
Corrective Action
(See "Removing Sheets.")
→P.656
(See "Loading Rolls in the Printer.")
Corrective Action
Follow these steps to replace the used roll with a new roll
of the same type and size.
>
Messages regarding paper
>
→P.628
This paper cannot be used.
13
897

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Imageprograf ipf815 mfp m40

Table of Contents