Configuring The Printer's Netware Network Settings - Canon imagePROGRAF iPF815 User Manual

Network Setting

Configuring the Printer's NetWare Network Settings

Follow the steps below to configure the NetWare network settings.
1.
Start the web browser and enter the following URL in the Location (or Address ) box to display the RemoteUI
page.
http://printer IP address or name/
Example: http://xxx.xxx.xxx.xxx/
2.
Select Administrator Mode and click Logon.
3.
If a password has been set on the printer, enter the password.
4.
Click Network in the Device Manager menu at left to display the Network page.
5.
Click Edit in the upper-right corner of the NetWare group to display the Edit NetWare Protocol Settings page.
6.
Refer to the NetWare Settings Items table to complete the settings.
NetWare Settings Items
Frame Type
NCP Burst Mode
Print Application
10
Packet Signature
Bindery
PServer
784
RPrinter
Configuring the Printer's NetWare Network Settings
> Network Setting (Windows)
Item
Specify the type of frame to use in NetWare.
Activate this setting to use NCP Burst Mode.
This mode supports fast data transfer when printing in queue server
mode. Normally, leave the setting On.
Choose the print service.
• Bindery PServer
• RPrinter
• NDS PServer
• NPrinter
Select If Requested by Server to use packet signature.
File Server Name Specify the name of a file server that has a NetWare print server.
(0–47 characters)
Print Server Specify the name of a NetWare print server.
Name (0–47 characters)
Print Server Set a password for the print server.
Password (0–20 characters)
Polling Interval Specify the interval to confirm jobs.
(1–15 seconds)
Print Server Specify the name of a NetWare print server.
Name (0–47 characters)
Printer Number Specify the number of the printer connected to the NetWare print
server.
(0–15)
>
Details
Default
Setting
Disabled
On
NDS PSer-
ver
If Reques-
ted by
Server
—
—
—
5
—
0
iPF815