Canon imagePROGRAF iPF815 User Manual page 382

Windows Software
9.
The Add Plotter - Ports screen opens.
Make sure that Plot to a port is selected, select the port that you want to use for the plotter, then click the
Nextbutton.
4
10.
The Add Plotter - Plotter Name screen opens. Click the Nextbutton.
366
Installing with the Add-A-Plotter Wizard
> HDI Driver >
Note
• In the Add Plotter - Ports screen, it is recommended to select Network Port. If you select Local
Port, the AutoCAD warning message may appear when printing.
Note
• You can change the Plotter Name setting here, but you will normally leave it as it is and go to Step
11.
iPF815