Roll Paper Cannot Be Inserted Into The Paper Feed Slot - Canon imagePROGRAF iPF815 User Manual

Troubleshooting
The paper will drop to the floor or to the lower part of the printer.
5.
Lower the Release Lever and close the Top Cover.
12
6.
Turn the printer on. (See "Turning the Printer On and Off.")
860

Roll paper cannot be inserted into the Paper Feed Slot

Cause
The roll paper is warped.
Roll paper cannot be inserted into the Paper Feed Slot
> Problems Regarding Paper
Note
• If there is paper left in the lower part of the printer, push it to the floor with your fingers.
• If the paper does not drop to the floor or to the lower part of the printer, fold an A4 sheet three times,
insert it through the gap of the Platen (a) and the Paper Retainer (b), and push the jammed paper out.
Corrective Action
Straighten out curls and reload the roll.
>
→P.694
iPF815