Printing Does Not Start; The Data Lamp On The Control Panel Does Not Light Up; The Printer Does Not Respond Even If Print Jobs Are Sent; Ink Filling - Canon imagePROGRAF iPF815 User Manual

Printing does not start

The Data lamp on the Control Panel does not light up .................................................................................... 863

The printer does not respond even if print jobs are sent ................................................................................. 863

Ink Filling.. is displayed ................................................................................................................................... 863
The display screen indicates Agitating ............................................................................................................ 864
The Data lamp on the Control Panel does not light up
Cause
The printer is not on.
The target printer was not selec-
ted when printing. (The printer is
in Sleep mode.)
The print job is paused. (The
printer is in Sleep mode.)
The printer does not respond even if print jobs are sent
Cause
The printer is offline.
You have printed when select Save in mail
box is selected in Output Method.
Ink Filling.. is displayed
Cause
The printer was forced off during oper-
ation.
iPF815
Make sure the power cord is securely plugged in, all the way. Press the Power but-
ton to turn on the printer.
In Windows, select the printer by clicking Select Printer or Printer in the printing
dialog box and try printing again.
In Mac OS X, open the dialog box of the printer driver, select the printer from the
list of Printer, and try printing again.
In Windows, restart the print job as follows.
1. Select the printer icon in the Printers and Faxes (or Printers ) window.
2. Clear Pause Printing in the File menu to restart the print job.
In Mac OS X, restart the print job as follows.
1. Click Print & Fax. (This is identified as Printer Setup Utility or Print Center
in other versions of Mac OS X.)
2. Select the printer, and then Resume Printer (or Start Jobs ) in the Printers
menu to restart the print job.
Press the Online button on the Control Panel to bring the printer on-
line.
Print the job saved on the printer's hard disk.
(See "Printing Saved Jobs.")
Wait until the system has been filled with ink. This process may take about
ten minutes.
Troubleshooting >
Corrective Action
Corrective Action
→P.572
Corrective Action
The Data lamp on the Control Panel does not light up
Printing does not start >
12
863