The Contrast Becomes Uneven During Printing; The Length Of Printed Images Is Inaccurate; Documents Are Printed Crooked; Documents Are Printed In Monochrome - Canon imagePROGRAF iPF815 User Manual

The contrast becomes uneven during printing

Cause
The paper feed amount is out of adjust-
ment.
The type of paper specified in the printer
driver does not match the type loaded in
the printer.

The length of printed images is inaccurate

Cause
In the printer menu, Band Joint is
specified in Feed Priority.
The type of paper specified in the
printer driver does not match the
type loaded in the printer.

Documents are printed crooked

Skew Skew Check Lv. has been set to Loose or Off.
Width Detection has been set to Off.

Documents are printed in monochrome

Cause
In the Advanced Settings of the printer driver,
Monochrome, Monochrome (BK ink), or
Monochrome Bitmap is specified in Color
Mode.
iPF815
Adjust the feed amount.
(See "Adjusting the Feed Amount.")
Load paper of the same type as you have specified in the printer driver.
(See "Loading Rolls in the Printer.")
(See "Loading Sheets in the Printer.")
Make sure the same type of paper is specified in the printer driver as you
have loaded in the printer.
1. Hold down the Stop button for a second or more to cancel printing.
2. Change the type of paper in the printer driver and try printing again.
To ensure the feed amount matches the paper size, select Print Length in Feed
Priority in the printer menu and enter the amount for adjustment in Adjust
Length.
(See "Adjusting the Feed Amount.")
You can adjust the feed amount in 0.02% increments.
(See "Main Menu Settings.")
Load paper of the same type as you have specified in the printer driver.
(See "Loading Rolls in the Printer.")
(See "Loading Sheets in the Printer.")
Make sure the same type of paper is specified in the printer driver as you have
loaded in the printer.
1. Hold down the Stop button for a second or more to cancel printing.
2. Change the type of paper in the printer driver and try printing again.
Cause
In the Advanced Settings of the printer driver, specify Color in
Color Mode and try printing again.
Troubleshooting > Problems with the printing quality
Corrective Action
→P.676
→P.628
→P.651
Corrective Action
→P.676
→P.722
→P.628
→P.651
Corrective Action
Choose Standard in Skew Check Lv..
Choose On in Width Detection.
Corrective Action
The contrast becomes uneven during printing
>
12
875