Wireless Setting Program (Phaser 3320Dni) - Xerox Phaser 3320DN User Manual

Wireless Setting Program (Phaser 3320DNI)

Wireless Setting Program (Phaser 3320DNI)
When installing the Phaser 3320DNI you can use the Wireless Setting program that was
automatically installed with the printer driver to configure the wireless settings.
Note: If you choose a wireless connection for your printer, you cannot use a wired connection at
the same time.
To open the program:
• Select Start > Programs or All Programs > Xerox Printers > Xerox Phaser 3320DNI > Wireless
Setting Program
1. Connect the machine to your
computer using the USB cable
Note: During installation, the
printer needs to be temporarily
connected using the USB cable.
2. Select Next
46 Xerox Phaser 3320DN/DNI
User Guide