Clearing Paper Jams From The Output Area; Troubleshooting Paper Jams; Multiple Sheets Pulled Together - Xerox Phaser 3330 User Manual

Clearing Paper Jams from the Output Area

Note
To resolve the error displayed on the control panel you must clear all paper from the
paper path.
1. Gently pull out the paper from the output area.
If you do not see the jammed paper or if there is any resistance when you pull, stop
and go to Clearing Paper Jams from the Back of the
2. If prompted, follow the instructions on the control panel display to continue printing.

Troubleshooting Paper Jams

Multiple Sheets Pulled Together

Probable Causes
The paper tray is too full.
The edges of the paper are not even.
The paper is moist from humidity.
Too much static electricity is present.
Using unsupported paper.
Humidity is too high for coated paper.
® ®
Xerox Phaser 3330 Printer
User Guide
Printer.
Solutions
Remove some of the paper. Do not load paper
past the MAX line.
Remove the paper, align the edges, and then
reload it.
Remove the paper from the tray, and replace
it with new dry paper.
Try a new ream of paper.
Do not fan transparencies before loading in
tray.
Use only Xerox approved paper. For details,
refer to Supported Paper.
Feed paper one sheet at a time.
Troubleshooting
7-21