At^sgauth Set Type Of Authentication For Ppp Connection - Siemens MC35 Command Set

AT Command Set

6.1.8 AT^SGAUTH Set type of authentication for PPP connection

Test command Response
AT^SGAUTH=? ^SGAUTH: (list of supported <auth>s)
OK/ERROR/+CME ERROR
Parameter
<auth>
0 None
1 PAP
2 CHAP
3 PAP and CHAP
Read command Response
AT^SGAUTH? +CGACT: <auth>
OK/ ERROR/ + CME ERROR
Parameter
See test command
Write command Response
AT ^SGAUTH= OK/ ERROR/ + CME ERROR
<auth>
Parameter
See test command
Reference Note:
Siemens
·
·
MC35_ATC_01_V05.00
indicates types of supported authentication
Power on default value is 3 (PAP and CHAP)
Parameter cannot be stored using AT&W
Page 173 of 256 15.07.2002