Siemens MC35 Command Set page 170

AT Command Set
MC35_ATC_01_V05.00
numeric parameter for the peak throughput class
<peak>
0 network subscribed value
Peak Throughput
1
2
3
4
5
6
7
8
9
<mean> numeric parameter for the mean throughput class
0 network subscribed value
Mean Throughput Class
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
31
Note: If parameters are not defined, the parameter default values depend on
the HLR-stored subscribed default values.
If some of the QoS parameters are omitted, then they will keep their current
value (or the default value if not specified so far), e.g.
at+cgqreq?
OK
at+cgqreq=1,0
OK
at+cgqreq?
+CGQREQ:1,0,0,0,0,0
OK
Page 170 of 256
Class Peak Throughput
(in octets per second)
Up to 1 000 (8 kbit/s).
Up to 2 000 (16 kbit/s).
Up to 4 000 (32 kbit/s).
Up to 8 000 (64 kbit/s).
Up to 16 000 (128 kbit/s).
Up to 32 000 (256 kbit/s).
Up to 64 000 (512 kbit/s).
Up to 128 000 (1 024 kbit/s).
Up to 256 000 (2 048 kbit/s).
Mean Throughput
(in octets per hour)
100 (~0.22 bit/s)
200 (~0.44 bit/s)
500 (~1.11 bit/s)
1 000 (~2.2 bit/s)
2 000 (~4.4 bit/s)
5 000 (~11.1 bit/s)
10 000 (~22 bit/s)
20 000 (~44 bit/s)
50 000 (~111 bit/s)
100 000 (~0.22 kbit/s)
200 000 (~0.44 kbit/s)
500 000 (~1.11 kbit/s)
1 000 000 (~2.2 kbit/s)
2 000 000 (~4.4 kbit/s)
5 000 000 (~11.1 kbit/s)
10 000 000 (~22 kbit/s)
20 000 000 (~44 kbit/s)
50 000 000 (~111 kbit/s)
best effort.
15.07.2002