At^smgo Set Or Query Sms Overflow Presentation Mode Or Query Sms Overflow - Siemens MC35 Command Set

AT Command Set
8.15 AT^SMGO Set or query SMS overflow presentation mode or query SMS
overflow
Test command Response
^SGMO: (list of supported <n>s) OK
AT^SMGO=?
Parameter
See write command
Read command Response
AT^SMGO? TA returns overflow presentation mode and SMS overflow status
^SGMO: <n>,<mode> OK
If error is related to ME functionality:
+CME ERROR: <err>
Parameter
See write command
Write command Response
AT^SMGO=<n> TA sets overflow presentation mode
OK
Parameter
<n>
<mode> SMS overflow status
Unsolicited result code
When the SIM overflow status changes, a URC is sent to TE. This requires a cor-
rect setting for SMS indications (AT+CNMI=3,1; see Chapter 5.10).
^SMGO: <mode>
Parameter
See write command
During data calls, a status change is indicated via a Break (100 ms). The Break
signal will be sent each time when a status change is detected.
Reference Note
· Incoming Class 1 short messages (ME specific) will be preferably stored to
Siemens
"ME" and may be transferred to the "SM" storage if "ME" is used up. Incoming
Class 2 messages (SIM specific) will be placed to the "SM" storage only.
If messages with different classes are received, the ^SMGO: 2 indication may
be presented, without prior indication of ^SMGO: 1. The indication ^SMGO: 1
means that both buffers ("ME" and "SM") are full. See also Chapter 5.11.
· For more information regarding SIM and ME specific message classes refer to
<dcs> and the following specifications: GSM 03.38 and 3GPP TS 23.038.
MC35_ATC_01_V05.00
SMS overflow presentation mode
0 disable (default)
1 enable
0 space available
1 SMS buffer full (buffer for received short messages is <mem3>. See
AT+CPMS in Chapter 5.11.
2 Buffer full and new message waiting in SC for delivery to ME
Page 202 of 256 15.07.2002