At+Cmut Mute Control - Siemens MC35 Command Set

AT Command Set

4.27 AT+CMUT Mute control

Test command
AT+CMUT=?
Read command
AT+CMUT?
Write command
AT+CMUT=<n>
Reference
GSM 07.07
MC35_ATC_01_V05.00
Response
+CMUT: (list of supported <n>s)
OK
Response
+CMUT: <n>
OK/ERROR/+CME ERROR
Response
OK/ERROR/+CME ERROR
Parameter
<n>: 0 mute off
1 mute on
Note
This command can be used in all audio modes (1 to 6) and during a voice
call only. See AT^SNFS in Chapter 8.26 for more details on the various
audio modes.
Users should be aware that when they switch back and forth between dif-
ferent audio modes the value of <mute> does not change. This means
that the status of mute operaton is retained until explicitly changed.
As alternative, you can use the AT^SNFM command described in Chap-
ter 8.22.
Page 100 of 256 15.07.2002