At+Ceer Extended Error Report - Siemens MC35 Command Set

AT Command Set

4.10 AT+CEER Extended error report

Test command Response
OK
AT+CEER=?
Execute command
TA returns an extended error report of the reason for the last call release and
location.
AT+CEER
Response
+CEER: <location ID>, <reason > , <ss_release>OK
Parameter
< location ID>
<reason>
<ss_release>
Reference Note
· AT+CEER is not available for data calls, please use ATS18=1.
GSM 07.07
· Default output in the case of a no-error-situation is +CEER: 0,0,0.
MC35_ATC_01_V05.00
Location ID as number code (see subclause 9.1.6)
Reason for last call release as number code (see subclause
9.1.6)
Release cause for last Supplementary Service Call
(see subclause 9.1.14)
Page 77 of 256 15.07.2002