Siemens MC35 Command Set page 142

AT Command Set
<pid>
<ra>
<sca>
<scts>
<st>
<toda>
<tooa>
<tora>
<tosca> GSM 04.11 RP SC address Type-of-Address octet in integer format (de-
<vp>
Reference Note
· Response to a CMGR to an empty record index: +CMGR: 0,,0
GSM 07.05
· Response to a CMGR to a not existing record index: +CMS ERROR: invalid
memory index
· The parameters <ra> and <tora> will only be displayed if AT^SSCONF=1 has
been set before. See Chapter 8.38 for details on AT^SSCONF.
MC35_ATC_01_V05.00
GSM 03.40 TP-Protocol-Identifier in integer format (default 0)
GSM 03.40 TP-Recipient-Address Address-Value field in string format;
BCD numbers (or GSM default alphabet characters) are converted to
characters of the currently selected TE character set (refer command
AT+CSCS Select TE character set.); type of address given by <tora>
GSM 04.11 RP SC address Address-Value field in string format; BCD
numbers (or GSM default alphabet characters) are converted to charac-
ters of the currently selected TE character set (refer command
AT+CSCS Select TE character set); type of address given by <tosca>
GSM 03.40 TP-Service-Centre-Time-Stamp in time-string format (refer
<dt>)
GSM 03.40 TP-Status in integer format
GSM 04.11 TP-Destination-Address Type-of-Address octet in integer
format (when first character of <da> is + (IRA 43) default is 145, other-
wise default is 129)
GSM 04.11 TP-Originating-Address Type-of-Address octet in integer
format (default refer<toda>)
GSM 04.11 TP-Recipient-Address Type-of-Address octet in integer for-
mat (default refer<toda>)
fault refer <toda>)
depending on SMS-SUBMIT <fo> setting: GSM 03.40 TP-Validity-Period
either in integer format (default 167) or in time-string format (refer <dt>)
Page 142 of 256 15.07.2002