Siemens MC35 Command Set page 92

AT Command Set
AT+CPIN?
+CPIN: SIM PIN
AT+CPIN=1111
OK
AT+CPIN?
+CPIN: PH-SIM PIN
AT+CPIN=4444
+CME ERROR: incorrect password
After the "PS" lock password was incorrectly entered three times in a row:
AT+CPIN?
+CPIN: PH-SIM PUK
AT+CPIN=12345678
Example 6 Attempt to unblock the "PS" lock using an invalid Master Phone Code: Due to
the timing algorithm explained in Chapter 4.35.1 the intervals between each at-
tempt are getting longer. See also AT^SPIC in Chapter 8.32.
Example 7 As an alternative to the AT+CPIN command you can use AT+CPWD. In this
case the following syntax shall be observed: AT+CPWD=PS,Master Phone
Code[,new password].
AT+CPWD=PS,12345678
Or
AT+CPWD=PS,12345678,3333
MC35_ATC_01_V05.00
Enter SIM PIN of present SIM card.
SIM PIN accepted.
"PS" lock password is required.
Bad password is given:
Master Phone Code is required (8-digit code
available from the manufacturer. See Chapter
4.35.1).
Master Phone Code has been accepted. As a
result, the mobile is operational, and the "PS"
lock is totally removed. If needed, it must be set
once again.
Deactivates the "PS" lock.
Deactivates the present "PS" lock
and sets a new "PS" lock.
Page 92 of 256 15.07.2002