At+Fmdl Identify Product Model; At+Fmfr Request Manufacturer Identification; At+Fopt Set Bit Order Independently - Siemens MC35 Command Set

AT Command Set

3.16 AT+FMDL Identify Product Model

Read command Send the model identification to the TA
AT+FMDL? Response
Gipsy Soft Protocolstack
OK
Reference Note
Siemens Used for Faxclass 2 only

3.17 AT+FMFR Request Manufacturer Identification

Read command Send the manufacturer identification to the TA
AT+FMFR? Response
SIEMENS
OK
Reference Note
Siemens Used for Fax class 2 only

3.18 AT+FOPT Set bit order independently

Write command Model specific command to set bit order independently of the understanding
which is "mirrored" and which is direct.
AT+FOPT=<opt>
Response
OK
Parameter
<opt>
Reference Note
Siemens Used for Fax class 2 only
MC35_ATC_01_V05.00
0 non-standard
1 standard
Page 58 of 256 15.07.2002