Sstn Remote-Sat Notification - Siemens MC35 Command Set

AT Command Set

7.2 ^SSTN Remote-SAT Notification

Proactive
Every time the SIM application issues a proactive command, via the ME, the TA
Commands
will receive a notification. This indicates the type of proactive command issued.
AT^SSTGI must then be used by the TA to request the parameters of the proac-
tive command from the ME.
Upon receiving the ^SSTGI response from the ME, the TA must send AT^SSTR
to confirm the execution of the proactive command and provide any required user
response, e.g. selected menu item.
Unsolicited result code
^SSTN: <cmdType>
Parameters
<cmdType>
Terminate
When the SIM application has issued a proactive command, via the ME, to the
Proactive
TA, it is possible that this command must be terminated. The ^SSTN Unsolicited
Command
Result Code is sent but with a different command type to indicate the termination
of the specified command.
Unsolicited result code
^SSTN: <cmdTerminateValue>
Parameters
<cmdTerminateValue>
SIM Applica-
Notification to the TA when the SIM Application has finished a command cycle
tion returns to
and again enters its main menue.
main menu
This URC should be used to open this menue on the sreen.
Unsolicited result code
^SSTN: <254>
Note
Reference
Siemens
MC35_ATC_01_V05.00
Proactive command ID
Terminate proactive command ID
Page 182 of 256 15.07.2002