Parameter Assignment; Setting Up The Pc For The Connection To The Simatic Iot2050 Device - Siemens SIMATIC IOT2000 SG-Shield Operating Instructions Manual

Parameter assignment

6.1

Setting up the PC for the connection to the SIMATIC IOT2050 device

Before setting up your PC
The devices are connected and supplied. Refer to section: Connecting (Page 15).
Procedure
1. Navigate to the settings of the used LAN network adapter.
In Windows 10: Windows "Settings > Network and Internet > Change adapter settings"
2. Right-click the used LAN network adapter and select "Properties" in the shortcut menu.
3. Select "Internet protocol Version 4 (TCP/IPv4)".
4. Click the "Properties" button.
Figure 6-1
SIMATIC IOT2000 SG-Shield
Operating Instructions, 08/2021, A5E50985404-AA
Windows: "Local Area Connection" window
6
17