Siemens MC35 Command Set page 139

AT Command Set
Reference
GSM 07.05
MC35_ATC_01_V05.00
the associated memory
<mr> GSM 03.40 TP-Message-Reference in integer format
GSM 03.40 TP-Originating-Address Address-Value field in string
<oa>
format; BCD numbers (or GSM default alphabet characters) are
converted into characters; type of address given by <tooa>
<pdu> In the case of SMS: GSM 04.11 SC address followed by GSM 03.40
TPDU in hexadecimal format: ME/TA converts each octet of TP data
unit into hexadecimal numbers containing two IRA characters (e.g.
octet with integer value 42 is presented to TE as two characters 2A
(IRA 50 and 65)). In the case of CBS: GSM 03.41 TPDU in hexa-
decimal format.
GSM 03.40 TP-Recipient-Address Address-Value field in string
<ra>
format; BCD numbers (or GSM default alphabet characters) are
converted into characters; type of address given by <tora>
<scts> GSM 03.40 TP- Service-Centre-Time-Stamp in time-string format
(refer <dt>)
<st> GSM 03.40 TP-Status in integer format
GSM 04.11 TP-Destination-Address Type-of-Address octet in inte-
<toda>
ger format (when first character of <da> is + (IRA 43) default is 145,
otherwise default is 129)
<tooa> GSM 04.11 TP-Originating-Address Type-of-Address octet in inte-
ger format (default refer<toda>)
<tora> GSM 04.11 TP-Recipient-Address Type-of-Address octet in integer
format (default refer<toda>)
Note
The parameters <ra> and <tora> will only be displayed if AT^SSCONF=1 has
been set before. See Chapter 8.38 for details on AT^SSCONF.
Page 139 of 256 15.07.2002