Version History - Siemens MC35 Command Set

AT Command Set

0 Version History

This chapter reports modifications and improvements over previous versions of the document.
"AT Command Set" Version MC35-ATC_01_V04.00 => MC35-ATC_01_V05.00
Chapter Page
1.5 17
1.6 18
2.3 20
2.12 29
2.35 39
2.45 47
4.6 70
4.9 75
4.11 78
4.16 83
4.19 85
4.21 88
8.13 199
4.21.2 91
4.24 96
4.26 98
4.27 100
4.28.1 102f
4.36 116
4.44 128
4.49 133
4.50 133
5.4 137
5.5 140
5.7 145
MC35_ATC_01_V05.00
AT command What is new
Character sets Chapter revised and associated character set tables
in Chapter 9.5 updated.
Flow control How to use flow control.
AT\Q<n> Further details added: Using RTS/CTS handshake.
Restoring AT\Q settings.
ATH Notes on Multiplex mode and GPRS operation cor-
rected
AT&F Added further commands to list of factory settings
AT+IPR Added note on minimum bit rate.
AT+CCFC Added note on applicability of <class> according to
GSM02.04.
AT+CCWA AT+CHLD can be used to put an active call on hold an
accept a waiting voice call. Not for data or fax calls.
Added notes on applicability of different <class>es.
AT+CFUN Chapter revised.
AT+CHLD Removed note on GPRS.
Added notes: AT+CHLD for voice calls only. Further
information on Call Waiting.
AT+CIND Revised Chapter.
AT+CLCK Corrected description of "FD" lock: PIN2 is requested
AT^SLCK as password (it is not sufficient to have done PIN2 au-
thentication before).
Added notes on applicability of different <class>es
and <fac>s.
AT+CLCK Modified examples.
AT+CLVL Added
AT^SNF0, AT^SNFV, AT^SNFS
AT+CMER Revised Chapter.
AT+CMUT Added
AT^SNF0, AT^SNFM, AT^SNFS
AT+CMUX AT\Q3 (hardware flow control) is recommended.
Notes regarding execution of ATH on different chan-
nels corrected.
AT+CPIN2 Added more details on validity of CPIN2 authentica-
tion.
AT+CSCS Further details added: Using RTS/CTS handshake.
Restoring AT\Q settings.
AT+VTD Revised chapters.
AT+VTS
AT+CMGL Removed all information on CB messages.
AT+CMGR Added note regarding AT^SSCONF.
AT+CMGW Parameter <length> corrected (only required for PDU,
not for text mode).
Result code after failure of storing a message to the
Page 9 of 256
information on related
information on related
AT commands
AT commands
15.07.2002