At+Csmp Set Sms Text Mode Parameters - Siemens MC35 Command Set

AT Command Set

5.15 AT+CSMP Set SMS text mode parameters

Test command Response
AT+CSMP=?
OK
Read command Response
+CSMP:<fo>,<vp/scts>,<pid>,<dcs> OK
AT+CSMP?
Parameter
See set command
Set command Response
TA selects values for additional parameters needed when SM is sent to the net-
AT+CSMP=
work or placed in a storage when text format message mode is selected. It is pos-
<fo>[,<vp/scts>[
sible to set the validity period starting from when the SM is received by the SMSC
,<pid>
(<vp> is in range 0... 255) or define the absolute time of the validity period termi-
[,<dcs>]]]
nation (<vp> is a string). The format of <vp> is given by <fo>. If TA supports the
enhanced validity period format, see GSM 03.40), it shall be given as a hexadezi-
mal coded string (refer e.g. <pdu>) with quotes.
Note:
When storing a SMS_DELIVER from the TE to the preferred memory storage in
text mode (refer write command to Message Memory +CMGW), <vp> field can be
used for <scts>
Parameter
<fo>
<scts>
<vp>
<pid>
<dcs>
Reference Note
GSM 07.05 The command writes the parameters to the non-volatile memory.
MC35_ATC_01_V05.00
depending on the command or result code: first octet of GSM 03.40
SMS-DELIVER, SMS-SUBMIT (default 17), or SMS-COMMAND (default
2) in integer format
GSM 03.40 TP-Service-Centre-Time-Stamp in time-string format (refer
<dt>)
depending on SMS-SUBMIT <fo> setting: GSM 03.40 TP-Validity-Period
either in integer format (default 167) ), in time-string format (refer <dt>),
or if is supported, in enhanced format (hexadecimal coded string with
quotes)
Protocol-Identifier in integer format (default 0), refer GSM 03.40
SMS Data Coding Scheme (default 0), or Cell Broadcast Data Coding
Scheme in integer format depending on the command or result code:
GSM 03.38
Page 157 of 256 15.07.2002