Ats3 Write Command Line Termination Character; Ats4 Set Response Formatting Character; Ats5 Write Command Line Editing Character - Siemens MC35 Command Set

AT Command Set

2.21 ATS3 Write command line termination character

Read command Response
ATS3?
<n> OK
This parameter setting determines the character recognized by TA to terminate
Write command
an incoming command line.
ATS3=<n>
Response
OK
Parameter
<n>
Reference Note
V.25ter

2.22 ATS4 Set response formatting character

Read command Response
ATS4?
<n> OK
Write command
This parameter setting determines the character generated by the TA for result
ATS4=<n> code and information text.
Response
OK
Parameter
<n>
Reference Note
V.25ter

2.23 ATS5 Write command line editing character

Read command Response
ATS5?
<n> OK
Write command This parameter setting determines the character recognized by TA as a request
ATS5=<n>
to delete the immediately preceding character from the command line.
Response
OK
Parameter
<n>
Reference Note
V.25ter
MC35_ATC_01_V05.00
000-013-127 command line termination character
000-010-127 response formatting character.
000-008-127 command line editing character
Page 33 of 256 15.07.2002