Examples: Call Barring - Siemens MC35 Command Set

AT Command Set

4.21.3 Examples: Call barring

Please note that when you configure or query call barring without specifying any classes, the settings
will refer to classes 1, 2 and 4 only (default setting).
Remember that most of the call barring types have to be subscribed to. Usually, the service is subject
to a password supplied from the provider.
Example 1
When checking the status of barring for outgoing international calls without
specifying classes, please note that the ME returns only the status of voice,
data, fax calls. The status of SMS and other classes is not reported.
at+clck=oi,2,0000
+CLCK: 1,1
+CLCK: 1,2
+CLCK: 1,4
OK
Example 2
To check the call barring status for outgoing international calls and all classes,
you are required to enter the integer sum referring to all classes:
at+clck=oi,2,0000,255
+CLCK: 1,1
+CLCK: 1,2
+CLCK: 1,4
+CLCK: 1,8
+CLCK: 0,16
+CLCK: 1,32
+CLCK: 0,64
+CLCK: 0,128
OK
Example 3 To activate call barring for outgoing international voice and data calls:
at+clck=oi,1,0000,3
OK
Example 4
To disable call barring for outgoing international fax (class 4) and SMS (class 8)
calls:
at+clck=oi,0,0000,12
OK
Example 5
To disable call barring for all outgoing international calls:
at+clck=oi,0,0000,255
OK
MC35_ATC_01_V05.00
or without <passwd>:
outgoing international voice calls barred
outgoing international data calls barred
outgoing international fax calls barred
or without <passwd>: at+clck=oi,2,,255
outgoing international voice calls barred
outgoing international data calls barred
outgoing international fax calls barred
outgoing international SMS barred
no barring (e.g. not supported or not activated at all)
outgoing international data calls barred
no barring (e.g. not supported or not activated at all)
no barring (e.g. not supported or not activated at all)
(where 3 is the sum of class 1 + class 2)
(where 12 is the sum of class 4 + class 8)
Page 93 of 256
at+clck=oi,2
15.07.2002