Siemens MC35 Command Set page 113

AT Command Set
· Wait 10 seconds after PIN input before using SMS related commands.
· <pin> and <new pin> can also be entered in quotation marks (e.g. "1234").
· To check the number of remaining to attempts to enter the passwords use
· See also Chapter 9.2 "Summary of PIN requiring AT Commands".
· See Chapters 4.38 and 8.36 for information on passwords.
MC35_ATC_01_V05.00
MC35 offers various options to verify the present status of network registra-
tion: For example, the AT+COPS? (Chapter 4.30) command indicates the
currently used network. With AT+CREG (Chapter 4.41) you can also check
the current status and activate an unsolicited result code which appears
whenever the status of the network registration changes (e.g. when the ME
is powered up, or when the network cell changes).
the AT^SPIC command. See Chapter 8.32.
Page 113 of 256 15.07.2002