At^sstgi Remote-Sat Get Information - Siemens MC35 Command Set

AT Command Set

7.3 AT^SSTGI Remote-SAT Get Information

Test command Response
AT^SSTGI=?
^SSTGI:(list of supported <state>s), (list of supported <cmdType>s)
OK
Read command Response
AT^SSTGI?
^SSTGI: <state>, <cmdType>
OK
Parameters
<state>
<cmdType> Ongoing Proactive Command
Write command
Regularly this Write command is used upon receipt of an unsolicited result code
AT^SSTGI= ^SSTN:<cmdType>.
The TA is expected to acknowledge the ^SSTGI response with AT^SSTR to
<cmdType>
confirm that the proactive command has been executed.
AT^SSTR will also provide any user information, e.g. a selected menu item.
The command type value is returned to the ME to identify which ^SSTN is being
responded to.
Note
Reference
Siemens
MC35_ATC_01_V05.00
Remote-SAT interface states (refer to AT^SSTA)
Page 183 of 256 15.07.2002