At+Ccug: Closed User Group - Siemens MC35 Command Set

AT Command Set

4.8 AT+CCUG: Closed User Group

Test command The Test command returns the supported parameters.
AT+CCUG=?
Response
+CCUG: (list of supported <n>s),(list of supported <index>),(list of supported
<info>) OK
Read command Explicit CUG invocation means that at each call setup, CUG information is
added to the called number.
AT+CCUG?
The Read command returns if the Explicit CUG invocation is activated, which
CUG index is chosen, and if Preferential Group or Outgoing Access is sup-
pressed.
Response
+CCUG: <n>, <index>,<info> OK
Write command
The write command serves to activate or deactivate the explicit CUG invoca-
tion, to set the desired index, and to specify if Preferential Group or Outgoing
AT+CCUG=
Access shall be suppressed.
[,<n>[,<index>[,<in
fo>]]
Parameter
<n>
<index>
<info>
Response
OK/ERROR/+CME ERROR
Reference Note
GSM 02.85
Siemens
MC35_ATC_01_V05.00
0 Deactivate explicit CUG invocation
1 Activate explicit CUG invocation
0...9 CUG index
10 No index (preferred CUG taken from subscriber data)
0 No information
1 Suppress Outgoing Access
2 Suppress preferential CUG
3 Suppress preferential CUG and Outgoing Access.
Page 74 of 256 15.07.2002