Appendix; Summary Of Errors And Messages; Summary Of Cme Errors Related To Gsm 07.07 - Siemens MC35 Command Set

AT Command Set

9 APPENDIX

9.1 Summary of ERRORS and Messages

The final result codes +CME ERROR: <err> and +CMS ERROR: <err> indicate errors related to mo-
bile equipment or network. The effect is similar to an ERROR result code.
A final result error code terminates the execution of the command and prevents the execution of all
remaining commands that may follow on the same command line. If so, neither ERROR nor OK result
code are returned. A 30 seconds timeout causes ERROR to be returned when the input of a command
is not complete.
The format of <err> can be either numeric or verbose. This is set with the AT+CMEE command (see
Chapter 4.25).

9.1.1 Summary of CME ERRORS related to GSM 07.07

Code of <err> Meaning
0 phone failure
1 no connection to phone
2 phone-adapter link reserved
3 Operation not allowed
4 Operation not supported
5 PH-SIM PIN required
6 PH-FSIM PIN required
7 PH-FSIM PUK required
10 SIM not inserted
11 SIM PIN required
12 SIM PUK required
13 SIM failure
14 SIM busy
15 SIM wrong
16 Incorrect password
17 SIM PIN2 required
18 SIM PUK2 required
20 Memory full
21 invalid index
22 not found
23 Memory failure
24 text string too long
25 invalid characters in text string
26 dial string too long
27 invalid characters in dial string
30 no network service
31 Network timeout
32 Network not allowed emergency calls only
40 Network personalization PIN required
41 Network personalization PUK required
MC35_ATC_01_V05.00 Page 229 of 256 15.07.2002