AT Command Set
5.11 AT+CPMS Preferred SMS message storage
Test command
Response
+CPMS: (list of supported <mem1>s), (list of supported <mem2>s), (list of sup-
AT+CPMS=?
ported <mem3>s)
Parameter
See write command
Read command
Response
+CPMS: <mem1>,<used1>,<total1>,<mem2>,<used2>,<total2>,
AT+CPMS?
<mem3>,<used3>,<total3> OK
If error is related to ME functionality:
+CMS ERROR
Parameter
See write command
Write command
Response
TA selects memory storages <mem1>, <mem2> and <mem3> to be used for read-
AT+CPMS=
ing, writing, etc.
<mem1>
+CPMS: <used1>,<total1>,<used2>,<total2>,<used3>,<total3> OK
[,<mem2>
[,<mem3>]]
If error is related to ME functionality:
+CMS ERROR:<err>
Parameter
<mem1> Memory to be used when listing, reading and deleting messages:
<mem2> Memory to be used when writing and sending messages:
<mem3> Received messages will be placed to this storage if routing to TE is not
<usedx> Number of messages currently in <memx>
<totalx> Number of messages storable in <memx>
Reference
Note
GSM 07.05
General remarks
· The Mobile Equipment storage "ME" offers space for 25 short messages.
· The storage "MT" is the sum of the storages "ME" and "SM". The indices (<in-
dex>) from 1 to 25 are associated to the "ME" storage. Indices equal to 26 and
higher are allocated to the "SM" storage.
· <mem1>, <mem2> and <mem3> are saved in the non-volatile memory.
· The user should be aware that the setting "MT" involves "ME" and "SM", with
"ME" being filled up first. If the "ME" storage is full, MC35 will proceed with the
"SM" storage.
Incoming Class 1 short messages (ME specific) will be preferably stored to
MC35_ATC_01_V05.00
"SM"
SIM message storage
"ME"
Mobile Equipment message storage
"MT"
Sum of "ME" and "SM" storages
"SM"
SIM message storage
"ME"
Mobile Equipment message storage
"MT"
Sum of "ME" and "SM" storages
set. See AT+CNMI command with parameter <mt>=2 (Chapter 5.10).
"SM"
SIM message storage
"MT"
Sum of "ME" and "SM" storages
Page 152 of 256
15.07.2002