Changing The Sol Port Number; Changing The Access Account Of A Target Device; Changing Target Device Parameters - Avocent MERGEPOINT 53XX SP MANAGER Installer/User Manual

52 MergePoint Service Processor Manager SP53XX Installer/User Guide
3. In the top navigation bar, click Target.
4. Click Synchronize BladeCenter. The blades on the side navigation bar are synchronized with
the selected target device.

Changing the SoL port number

To change the SoL port number:
1. In the side navigation bar, click a target device name.
2. Click the Properties tab.
3. In the top navigation bar, click Target.
4. In the SoL Port field, type a SoL port number and click Apply.

Changing the access account of a target device

To change the access account of a target device:
1. Click the Targets tab. The Targets window appears.
2. In the Managed Targets list, click the desired target device link.
3. In the Username and Password field, type the username and password you would like to use to
access the target device.
4. Click Apply.
NOTE: For an unverified target device, you can select Verify the username and password to verify the target
device with the username and password you enter.

Changing target device parameters

You can modify target device parameters, including username and password, verification status, SP
profiles and SoL access.
To change target device parameters:
1. In the side navigation bar, click a target device name.
2. Click the Properties tab.
3. In the top navigation bar, click Target. A window displaying target device
information appears.
4. Click Edit. The Edit Target window appears.
5. In the Alias field, type the new name for the target device.
6. For an unverified target device, if you want to require a username and password when
connecting to the target device, select Verify username and password.
a. To use the preset credentials configured by the manufacturer, deselect Change username
and password.
- or -