Configuring An Authentication Method For The Mergepoint Sp Manager - Avocent MERGEPOINT 53XX SP MANAGER Installer/User Manual

72 MergePoint Service Processor Manager SP53XX Installer/User Guide

Configuring an authentication method for the MergePoint SP manager

By selecting the Users-Authentication menu option, the administrative user can configure the
authentication method that applies when anyone attempts to log into the MergePoint SP manager.
By default, Local authentication is in effect and no configuration is required.
The specified type of authentication server must be available and must be configured as described
under Configuring Groups for Use with Authentication Servers on page 91.
To configure an authentication method for MergePoint SP manager logins:
1. Click the Users tab.
2. In the top navigation bar, click Authentication. The Authentication Configuration
window appears.
3. Select the desired authentication method from the Authentication Method drop-down menu.
4. Click Apply.